Kemper Profiler Player Bundle

Bundle offer comprising

Kemper Profiler Player

Multi Effect Pedal for Electric Guitar

• Transforms the pedalboard into an arena-ready touring rig
• Kemper profiling technology and Kemper FX in the size of a stomp pedal
• Loads any amp profile from the huge library of available free and commercial profiles and provides selected FX settings, IR loading and switching options
• 4 Effect Blocks in addition to the amp stack - 2 Pre and 2 Post Amp
• Features 3 individually assignable footswitches for switching between Rig, FX and Performance as well as the most important controls and buttons
• LED system provides detailed visual feedback on the current device status
• In-depth editing via the Rig Manager software available for all relevant platforms
• Bluetooth and WiFi connection
• Controls: FX1, FX2, gain, bass, middle, treble, rig vol, master vol
• Push buttons: Bank, 1 - 5
• Footswitches: 1, 2, 3
• FOH/Studio output: XLR
• Stereo monitor output: 2x 6.3 mm stereo jack
• Headphone output: 6.3 mm stereo jack
• Expression pedal connection: 6.3 mm stereo jack
• 2 USB connections
• Power supply adapter connection: barrel connector 5.5 x 2.1 mm, centre negative
• Power supply via 9-12 V DC power supply
• Dimensions (W x D x H): 145 x 166 x 68 mm
• Weight: 1110 g
• Includes power supply

Note: Battery operation is not supported

Seymour Duncan Power Stage 200

Compact Pedalboard Power Amplifier

• Power: 200 watts into 4 ohms
• Suitable for operation of guitar cabinets with 4-16 ohms
• Suitable for connection directly after effects units
• Cab Sim and EQ can be switched on and off for headphone output and balanced out
• 4-Band EQ (Bass +/- 10 dB at 87 Hz, Mid +/- 10 dB at 645 Hz, Treble +/- 8.5 dB at 4.4 kHz, Presence +/- 6.8 dB at 11.6 kHz)
• Controls for Level, Bass, Mid, Treble, Presence, Phones
• Cab Sim On/Off switch
• EQ On/Off switch
• Status LEDs for power supply
• Power Amp Clipping and Preamp Clipping
• Output impedance min. 4 Ohm
• Input voltage 100-240 V AC
• Dimensions (L x W x H): 157 x 127 x 63.5 mm
• Weight: 1.3 kg

Switches and connections on the rear panel:

• Power switch
• 6.3 mm mono jack inputs/outputs
• 6.3 mm headphone output
• 3.5 mm jack aux input
• XLR balanced output
• Power socket

Mission Engineering EP1-KP-GN

Expression Pedal

• With integrated switch specifically for using with the Kemper Profiler
• Linear potentiometer for a precise and natural adjustment that is calibrated to match exactly the specifications of the Kemper Profiler
• Integrated toe switch effects on and off without requiring a separate foot switch
• Works with all Kemper Profiler models
• Dimensions (L x W x H): 251 x 99 x 76 mm
• Weight: 1.43 kg
• Colour: Green

Rockboard Flat TRS Cable 40 cm

Cable for Effect Units

• Length: 40 cm
• 6.3 mm TRS stereo line < = > 6.3 mm TRS stereo angle jack
• Flat TRS cable with rectangular cross-section
• For connecting footswitches or expression pedals
• 2 Flexible copper conductors 20 x 0.12 mm
• Wound copper shield: 34 x 0.12 mm
• Polyethylene signal insulation
• PVC sheathing
• Capacitance less than 10 pF/decimetre
• Conductor resistance less than 10 mOhm/decimetre
• Working temperature: -15° C to +70° C
• Outer dimensions of the cable (W x H): 7 x 3 mm
• Outer dimensions of the plug (W x H): 12.5 x 7.5 mm
• Colour: Black

Harley Benton FPC-28 Flat Patch Cable

Patch Cable

• Length: 28 cm
• Professional patch cord for effects pedals
• Angled, on both sides, extra flat jack plug
• Saves space
• Very flexible
• Colour: Black