Customer reviews about LP 592A-X Mic Claw with Z-Rod

TM

Buy as many as you can fit in the peli

Theodore Miller 09.09.2019

Just bought my 3rd 4th and 5th. These things can get you out of a lot of sticky situations, but most importantly they've allowed me to eliminate all stands on the drum kit. With these, pluss a couple a56d's i can have a full 12 channel drum patch with no stands needed.
This is great for quick turnarounds as a touring engineer as the kit just has to be set up, and all mics are already pre clamped perfectly in place, just plug and go. Then when the show is over, just pull all cables and the kit can get lifted off.
Also useful in weird situations, need to get two cats over the stage access with no cable ramp? Clamp them up high and use them as 'hooks', taping the cables onto them.
The price has gone up by £10 since i bought the first two. Not a deal breaker but not ideal.

Overall id suggest investing in a pair, You'll love what they allow you to do.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

BB

I use it for kick

Branimir Bozak 13.11.2018

Excellent mic claw for congas, or - if you are like me - for kick.
Too bad there is no version with a flat clamp, this way I have to protect the kick drum hoop with layers of gaff tape before I hook up the LP claw - since it has a profile suited for conga rims.

Threads are good, screws too, will hold place during the gig, no problem!

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

B

Versatile, strong and stable

BernieW 03.11.2022

This is a really well made unit, all the parts are machined accurately so the moving parts won't jam and it always works as it should. The Z-bar stays in the position you set and never sags. It can grip the rims of a drum or the rod of a cymbal stand, however I believe if the claw was re-designed it could attach to the thicker base of a stand, for cymbals, snare, hi-hats etc. This is its limitation. Also, when used this way it can sometimes slip around the rod, even if knurled. A rougher finish would help. But the other similar mounts I have tried also have this problem. This is minor though and the Claw fits onto all sorts of things, such as the tuning lugs of congas, even kick drum legs. You can set it at any reach and angle and it is strong enough to stay there, so long as the place you mount it is strong enough. Despite the minor limitations it's still an extremely useful tool and has been a classic for decades, for good reasons. The current model has been improved. It's the best mount on a snare or tom tom rim for SM57's, M201's or mics of similar size and weight. Great stability and strength, always reliable. I take mine to every gig

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Swiss Army knife mic clamp

Anonymous 15.11.2021

Don’t be fooled by the original design of this clamp being made for percussion, this thing clamps great onto flat surfaces for wireless paddles etc. fantastic device

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

JD

Essential piece of kit

Jim DeBarker 04.12.2017

I have a pathological hatred of having too many microphone stands on stage if I can avoid it and these solve almost any problems with drums other than the drummer staying sober or keeping in time, although I have yet to try inserting one into the drummer to solve these too...

3

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

L

Super handig

Landerd 11.08.2021

Iets duurdere mic clamps, maar zijn geld meer dan waard;
-Stevig gemaakt
-Zeer flexibel, kantel en draai-baar
-goede grip op vele materialen vooral bij drum statieven

minpuntje: gaat niet ver genoeg open/bek is voorzien voor smalle buizen

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

M

Mr.Haw 28.01.2020

Perfect clamp for miking under hat's, cymbals and percussion.
Would highly recommend any audio engineer to have a few in his tool bag! Makes for a nice clean stage with the need for little to no clamps on a drum kit.

The arm is fully rotateable 360 which I couldn't tell from initial purchase description.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

CG

Does the job perfectly

Chris Grimshaw 09.07.2020

I use this to mic the kick drum on stages where space is tight. It has worked perfectly every time I've needed it, and is a lot more compact than a mic stand!

The build etc feels very solid, and I expect this will last many more festivals to come.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

AS

great all-around mic holder

Anton Samokhvalov 24.08.2019

LP Claw is a great product that helps you mic literally everything: you can use it with drums, percussion, cymbals, guitar cabinets etc.

I use LP Claws for my snare drum & bass drum, it allows me to position mic's in a right way & be sure that mic's will be at their places during the performance.

You can get rid of all microphone stands on stage with these clamps.

Build quality is great, it can last for years

One small thing about this clamp - you need mic holder with 5/8" threads

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

SN

Well built!

SG Nathan 13.07.2023

This product gives so much flexibility on setting up my drum mics..Awesome product!!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

LP 592A-X Mic Claw with Z-Rod

161 Customer ratings

You have to be logged in to rate products.

80 Reviews

Served with love!

LP 592A-X Mic Claw with Z-Rod

161 Customer ratings

You have to be logged in to rate products.

80 Reviews