Warning. If you are going to use these for mobile DJ and small venues, don't use them in standalone mode they will blind your audience. They are seriously bright and they only way they are useable for me is to run them via DMX and turn the brightness down on them.
The output is not beams but a wash so bare that in mind. They are great for floor mounting and pointing at backgrounds and ceilings etc, but I would avoid pointing them directly at your dancefloor area. My favourite way to use these is using all white and running chases from my DMX controller. That effect is really cool on them, and if your DMX controller will flash fast enough, they strobe nicely (or in 5 channel mode you can strobe from the unit on channel 5)
5 or 13 channel mode,
5 channels gives you R G B control, brighntess and strobe. The disadvantage in this mode is all 16 LEDs are the same colour.
in 13 channel mode, you control 4 banks of 4 LEDS and can control RGB for each bank. Channel 13 for brightness.
It's a shame they didn't utilise channels 14 and 15 for a strobe function in this mode, and also to range through the pre-programmed modeds like other Stairville lights do,
All in all though, a whole lot of light output for the money, and very useful in any setup.