Behringer System 100 Bundle

Bundle offer comprising

Behringer 112 Dual VCO

Eurorack Module

• Contains two identical analogue VCOs
• Waveforms: triangle, sawtooth and square/pulse
• Adjustable pulse width and PWM CV input with attenuator
• Octave selector and fine-tune control
• Hard- and soft-sync
• 3 Pitch CV inputs with attenuators
• Current consumption: 130 mA (+12 V) / 70 mA (-12 V)
• Width: 16 HP
• Depth: 46 mm

Behringer 121 Dual VCF

Eurorack Module

• Authentic reproduction of the original "System 100M" circuitry
• 2 Low-pass filters with cut-off frequency and resonance control
• Each filter has 3 audio outputs and 3 CV inputs with attenuators
• Each VCF has an additional switchable 3-mode high-pass filter
• 3-Channel mixer per VCF allows independent mixing of all input signals
• Current requirement: 40 mA +12 V, 40 mA -12 V
• Width: 16 HP

Behringer 130 Dual VCA

Eurorack Module

• Analogue 2-channel VCA
• Per channel: Mixer with 3 adjustable inputs, 3 CV inputs with attenuator, gain control, 2 signal outputs (low/high) and switch between linear and exponential characteristics
• Current consumption: 30mA (+12V) / 20mA (-12V)
• Width: 16 HP

Behringer CP1A

Power supply module for Eurorack systems

• Control LEDs for +12 V, -12 V and +5 V.
• Slots for 2 Flying Bus Boards with 7 slots each
• Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V)
• Width: 4 HP
• Depth: 52mm
• Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each

Behringer Eurorack 104

Eurorack empty housing

• Compact empty housing for synthesizer modules and accessories in a 3 U format
• Sturdy aluminium frame with wooden side walls
• Width: 104 HP
• maximum depth: 38 mm (1.5")
• Easy positioning of modules using 52 sliding nuts (included)
• Large rubber feet are secure and non-sliping on most surfaces
• Dimensions (W x H x D): 546 x 84 x 133 mm
• Weight: 1.2 kg
• Design and development in the UK

Behringer 150 Ring Mod/Noise/S&H/LFO

Eurorack Module

• Analogue ring modulator
• Noise generator with two outputs for white noise and pink noise
• Sample & hold unit with clock out, external clock in and fader for clock rate and lag time
• Analogue LFO with 5 waveforms
• Fader for frequency and delay time
• Three frequency ranges selectable (0.03 - 30Hz)
• CV and trigger input and 2 signal outputs
• Current consumption: 60mA (+12V) / 50mA (-12V)
• Width: 16 HP
• Depth: 44 mm

Behringer 140 Dual Envelope/LFO

Eurorack Module

• Two independent analogue ADSR envelopes
• For each envelope: manual trigger button, gate input, fader for attack, decay, sustain and release
• 2 Signal outputs and inverted output
• Analogue LFO with 5 waveforms
• Fader for frequency and delay time
• Three frequency ranges selectable (0.05 - 30Hz)
• CV and trigger input and 2 signal outputs
• Current consumption: 40mA (+12V) / 40mA (-12V)
• Width: 16 HP
• Depth: 44 mm

2x the sssnake DD1030

Patch Cable Set

• Mini jack mono to Mini jack mono
• Length: 30 cm
• Set of 6 cables