Customer reviews about Fender Neck Screw Set – Thomann United Arab Emirates

M

Good, but overpriced

Madman 14.10.2017

They're being used on a guitar I repaired, that the owner had lost them (as well as done other parts).

I bought these because the client wanted. Otherwise I would've bought either cheaper ones from Thomann, or I would've gone to a local store and would've bought cheaper ones anyway, that, from my experience, do the same job, with quality, for way less money.

Butt they're good, and if you're looking for genuine parts only... This is it.

2

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

MS

Solid, Well made, perfectly fitting

Michele S 06.11.2017

By experience I can say that these screws will give no problems. They resist multiple screwing/unscrewing cycles and they fit perfectly.
Quality is perfect, as much as spacing. Highly recommended

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

T

Poor quality metal

TrEr 19.09.2019

I got these to replace the worn screws on one of my older Fenders. This bass has the truss rod adjustment at the neck heel so the neck needs to be removed for adjustments.

The metal in these screws are surprisingly poor quality for an original Fender product. It's more like the soft metal used in cheap Far Eastern products. Which I suspect is exactly what this is. The heads started stripping the first time I tightened them. After being tightened just once they're practically as bad as the old ones I wanted to replace. At least the old ones are made of harder metal so I put them back instead.

Very poor. Avoid.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

s

for lazy people

soulcow 16.12.2019

I'm sure you can find equally good screws in any diy store for way cheaper price per screw, but you often need to buy in bulk, and you need to look for the right size. For lazy people like me, this is just fine, albeit a tad overpriced. The metal quality is very good, you won't screw them up.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

K

Great neck screws.

Kostiantyn 15.07.2019

All around great neck screws. The hats look nice and shiny, much better than no-name brands you may decide to opt out for.

Good screws matter and should not be overlooked.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

j

They're screws!

jurcanumacheamamisu 16.02.2023

I was pleased to see such high quality screws, they fit perfectly and using a high-quality screwdriver I managed to drive them in securely and properly. The thread profile is perfect and the head is ground impeccably. 10/10 exquisite screws

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

TS

As you expect

Topaz Skull 01.10.2024

It seems harder and harder to find good quality spare parts these days... Well these screwcome with no frills but they deliver what expected...

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Product as expected

Anonymous 29.08.2016

No issues here. Product appears to be as advertised. Will mount on next project. Further commentary will be added if warranted.

1

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

G

they do the trick

GeorgeK2686 14.03.2023

They fulfill their purpose! They successfully keep the neck plate in place and in contact with the body!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

M

Correct for Fender necks

Matt.S 14.10.2019

At least for a vintage Jaguar project I'm working on. I don't believe Fender ever used anything else for their necks, so this will do the job.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Fender Neck Screw Set

315 Customer ratings

You have to be logged in to rate products.

18 Reviews

Served with love!

Fender Neck Screw Set

315 Customer ratings

You have to be logged in to rate products.

18 Reviews