Customer reviews about Harley Benton Fret Rocker

M

Rough but it works.

MacGee 10.09.2022

Bearing in mind this product was very cheap so my expectations were low.
However, I was pleased to find that when I checked the edges they were flat. At least when I checked it with an engineer's ruler I couldn't see any gaps whatsoever.
However, where this product isn't so good is the finishing quality. The burring on the cut edges is sharp. This need to be carefully sanded/smoothed before use. You could cut yourself or damage your frets.
But this was ok for me as the main function of straight edges was achieved and a bit of smoothing for a cheap unfinished product can be expected.
Recommended for anyone on a tight budget who doesn't mind finishing off the product.

3

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

m

Not machined properly...

mystovski 25.01.2024

The point of spending money on a fret rocker is that it's supposed to be straighter than a random object like for instance, a credit card. Unfortunately this one is machined very poorly and it's just not fit for the purpose. The sharp edge is slightly bent, which looks a bit like they used a blunt tool to cut it. What is good about it? You can take some sanding papers and try to even out the edges by putting a sanding paper on something very flat like a window glass. This shouldn't be too difficult. But should it come like this? Hell no.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

CR

Does the job

Curt R 11.10.2020

I'm not a luthier or guitar tech. I just need something cheap and cheerful to check the frets on new guitars to see which ones need to go to the tech for fretwork.

Does the job. There is a little tiny line protruding, on the longest side, where it looks like the machine cut started and finished. This isn't really a major issue, as long as you don't put that bit on the fret!

I was worried about it having sharp edges, as it's so cheap, but the edges are ever so slightly rounded off, so very little risk of cutting your fingers with these.

I'd recommend it, for the money.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

D

Useful tool

Davor_Zerjav 02.03.2022

It's ok, but it is quite sharp on edges, so first you have to sand it .

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

M

Surprisingly rough

Milberry 09.11.2024

The quality leaves much to be desired. It is meant to be a "precision tool", so why not make the edges just straignt and smooth? I think it does not take a rocket scientist to process a simple piece of metal properly. I hope the product improves in the future. Mine will need to be additionally finished on a piece of sandpaper.
The only thing that justifies the product a little bit is its low price. The Stewmac original costs about 5 times more.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

KV

Mediocre quality but worth a shot

Kostas V. 05.11.2022

It seems that is not completely straight. It is not that bad but for example there are some frets I have tested two different sides and one may move a bit while the other doesn't.

Overall it is ok if you want to have a rough idea but you cannot completely trust it. Worth a shot because of it's low price in case you get a good one.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

O

Aceptable.

Oscar95 30.12.2023

Cumple con su función.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

p

Rough and sharp but works

pivgin 28.02.2023

pretty rough, sharp edges, you can easily cut yourself with. Still doing the job, but won't suggest buying. Bad quality product

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Sokoloros 14.02.2023

Mine is bent . i did not expect much tho , probably can be fixed

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Harley Benton Fret Rocker

367 Customer ratings

You have to be logged in to rate products.

14 Reviews

Served with love!

Harley Benton Fret Rocker

367 Customer ratings

You have to be logged in to rate products.

14 Reviews