Jaspers 4R-150B

Used for two keyboards and desktop computer with large screen. The coresponding "studio" furniture is very expensive even to think about.
Top self was put in the back and with the third they support a self (from IKEA or other) and the other two support two keyboards. A small laptop table can be used for pc-keyboard or a use dedicated part. It solved the computer problem which requires a piece of furniture or a table with min cost. The pc has software instruments which can be synchronized with keyboards in an integral way. Nice for home studio. One disadvantage. It is large as it can handle 88-note keyboards and needs a whole wall to stand against at not too much footprint. But it makes sense to do it. Most configurations can be obtained with such a flexible equipment. The size depends on the keyboards though. Perfect ergonomy: Height and position of keyboards, height of computer screen, height of speakers (independent stand but fit inside). Sturdy. Wheels are removing anxiety in a minute with the whole build going back and forth with a finger. 10/10

This was a solid stand for me for 3 years, top manufacturing and flexibility. I have been very happy with the investment in this model! But, I would encourage everyone to inspect and retighten everything on your rack, once or twice a year. Recently I rearranged my stand and shifted some gear across the bars and changed the height of the middle two racks, and after having been stable for the preceding 20 hours, something happened while I wasn't present in the room. Something either slowly slipped down and shifted or a Tube Clamp Joint failed, and my stand tipped forward onto the hardwood floor, dumping all my gear with a few unfortunate but repairable casualties. Inspecting afterwards, a fiber-reinforced Tube Clamp Joint was found to fractured/broken, but I can't say if it just failed (unlikely) or if it was broken by the force of the stand hitting the floor (more likely due to the torque & impact). Previously, I had inspected the center of gravity while I was loading my gear onto the rack, and the lowest shelf had a similar amount of weight on it (~30kg) as it had for the previous 3 years, and it had been stable for the preceding 20 hours, so it's a mystery. I have ordered some additional Jaspers stand parts to replace the damaged Tube Clamp Joint, and provide some additional cross bracing and redundancy for potential future slipping. But all in all, I have been super happy with this stand! :)