Customer reviews about K&M 18952 Stacker BK for 18950

C

Great addition for 18950

Christopher770 16.01.2016

I use this pair of stackers on stage to support a 61 note synth over the top of a larger synth on the main stand.

The stackers are adjustable either for ease of playing or for visibility so that you don't obscure the bottom synth too much. This is done by either moving them up or down or adjusting the angle of tilt. This must be set prior to playing as it cannot be adjusted with the synths in place.

Initial setting up to ensure the stackers are level can be fiddly but once I realised that I needed to simply revolve one of the stackers through 360 degrees to match its positioning with the other it was fine. You will see what I mean.

The built in support pins are rogust and hold the top synth in place very well. However the stackers do not adjust for width and it is important to balance the top synth. Over enthusiastic playing at one end of the keyboard can move the synth vertically as it overbalances slightly but knowing this means you simply take a little care.

Otherwise this product together with the main stand it fits into is easily one of the most robust and secure on the market. Highly recommended.

2

1

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Sturdy and easily adjusted.

Anonymous 14.04.2016

I bought these to add an extra tier to my K&M 18950 and these couldn't be simpler to use - just slot them into the main stand, fixing them into place and then set your height and angle.

You can also adjust how far forward they extend over your existing keyboard, so you can have the upper one further back, to allow easier access to any surface controls.

The ends have a rubber-capped stopper, so your keyboard won't slip off if you have it tipping down at an angle.

Pros:

- a simple method of expanding storage for your keyboards
- sturdy
- easy to assemble.

Cons:

- none, really!

3

1

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Sturdy Stacker

Arthur99 19.12.2019

Very sturdy stacker, works perfectly in combination with the stand.
I've used it for small, medium and bigger instruments (MS101, OB-6 and a Hammond xk1c) and it worked perfectly for all of them.

Very high quality as you can expect from K&M.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

AF

Great Quality as Always from K&M

Artur F 18.12.2018

Very good quality. The price might be higher than with budget competitors, but the stability and built quality is supers. I would rather trust these holders to hold my keyboard.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

M

Easy to Set Up, Solid!

Michael8118 27.11.2020

Incredibly fast to install I am constantly changing my studio set-up and use these with an 18950. My only wish i that a third tier was available for this set-up. Other than that, a great solid product! Cheers Mike

I bought another set for the studio stand to go three tiers. I realise that they are not designed for this use, and the top keyboard sits a little far back, but if I am careful it works and I am happy with the setup.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

M

Great for what it is.

Marcus6718 07.12.2021

This is a simple and sturdy stand that does what it’s supposed to.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

MG

TOP !!!!!!

Mike Gin 24.02.2023

Its perfect I love the architecture

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

B

Allows me two keyboards on my K&M 18950

Badders 31.08.2019

The K&M 18950 keyboard stand is really good and the accessories are equally good. With these stackers I can confidently add a 2nd keyboard. Sturdy and robust.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

t

Rock Solid

tetonica 25.10.2020

Practical tier for a second (or third keyboard) - love it !

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Y

Good Quality

Yuga1 26.10.2018

I bought this product for the stand 18950. It's a perfect match and quality is very good. Perfectly stable.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

K&M 18952 Stacker BK for 18950

271 Customer ratings

You have to be logged in to rate products.

16 Reviews

Served with love!

K&M 18952 Stacker BK for 18950

271 Customer ratings

You have to be logged in to rate products.

16 Reviews