Kramer PA-240Z 240W Power Amplifier

Start 360°

Power Amplifier

1 x 240 W @ 70 V / 100 V
2 x 120 W @ 4 / 8 Ohm
With balanced and unbalanced inputs and line level output
2 Inputs with individual reinforcement
Each output supports independent input mixing with master volume, 3-band parametric EQ and selectable high-pass filter
Controllable via RS-232 and IP
Integrated DSP
Incl. power cable

Technical data:

Inputs: 1 x unbalanced stereo with 3.5 mm jack, 1 x balanced stereo +4 dBu/10 kO with 5-pole terminal block
Outputs: 1 x balanced stereo line level with 5-pole terminal block, 1 x stereo or 1 x mono speaker output with 4-pole large terminal block
Input sensitivity: Reaches full power at 0.3 V (-10 dBV)
Output power: 2x 120 W @4 ohms or 8 ohms or 1 x 240 W @70 V or 100 V
Amplifier type: Class D
Max. voltage gain: 26 dB SE/32 dB BTL
Dynamic range: 119 dB
Frequency range: 20 to 20000 Hz @ +/-1 dB
Signal to noise ratio: 80 dB - 10 dBV, 20 to 20,000 Hz
Control: Screw trimmer as gain attenuator
IP and RS-232
Audio THD+noise: 0.003 % (1,000 Hz @ 1 W)
Audio 2 harmonic: 0.08 % @75 W RMS @ 4 ohms, 6670 Hz
Power supply: Universal mains 85 to 265 VAC (full power at 120 to 230 V)
Overall efficiency: 89.5 %.
Dimensions: 21.5 x 16.3 x 4.4 cm
Weight: 0.9 kg

Available since January 2022

Item number 529006

Sales Unit 1 piece(s)

Channels 2

Output power at 100 V 240 W

Output power at 4 Ohms / Cannel 120 W

Rack Units 1 U

DSP/Frequency Yes

Convection cooling No

Class Class D

Input 6,3 mm Jack unsym. 1

Link Out No

Output Speaker Twist 1

Output Phönix clamps 1

Temperature controlled fan 1

Width 215 mm

Depth 163 mm

Height 44 mm

Weight 0,9 kg