Customer reviews about Neutrik NA3 FDM – Thomann United Arab Emirates

HT

great feed through/ follow through connectors

Howard T. 29.10.2017

I love these feed through connectors - one of those little things that makes the world go round. I'm often changing amp rack configurations and follow through connectors make life so much easier, compares wit soldered and rivetted connectors. in my case i bolt these to front plates so i can also remove and re-configure as needed - bycareful though, getting the right size nuts and bolts takes careful measurement and can be quite fiddly to install. of course there is nothing to stop you riveting as normal if you wish. they are exactly what you would expect from neutrik - solid, steadfast, reliable. I have had some of these installed in amp racks for more than 3 years without them working loose. definitely recommended.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

P

Well made product

PCasey 21.03.2022

These are well made, solid and reliable. I have over 30 of these and no problems so far.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

V

Good quiality!

Vika. 13.09.2021

There is not much to say about this product. It has a good quality build, easy to mount etc. Glad I Bought this particular one. My recommendations.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

AJ

XLR Jacks great for Permanent Installation and no soldering

AZ. Joel 16.06.2021

Neutrik is the "HIGH" Standard for quality products. Always feels, looks & works great! XLR Jacks great for Permanent Installation and no soldering

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Jr

What you'd expect

Just reviewing 06.05.2021

High quality Neutrik connector.
Simple and easy to use for rack mounting.
Excellent product as you'd expect.
Highly recommend (if you can't be bothered or don't know how to solder - however it's twice as expensive as the soldering option)

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

R

Does what it's supposed to

René1591 30.11.2016

Good quality. Small footprint. No soldering required. Do bear in mind that when you plug in a cable on ?the inside part?, the combined length (or rather depth) of the plug and the adapter is quite long. That might be a problem in some situations.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Solid

And.M. 02.01.2018

Very solid, used it in a flight case and it works as intended. Maybe a bit too long, but that's not a problem, at least in my case. Be careful with your screw choice, they'll have to be really good or you risk ruining your rack rails!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Simply effective

Anonymous 31.07.2014

I installed these in a church using them to patch a blank panel to a stagebox. It simplifies setup for the band by amateurs. The connections are good with good sound production. A couple are tight to plug into but this may reduce with use.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

BD

Neutrik NA3 FDM

Benni D. 14.05.2013

This is a great Neutrik connector! Good for building microphone input panels for racks etc, and great for those who don't want to solder!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Very happy with this!

Anonymous 04.01.2015

I bought the Neutrik plugs to fit in a 1 unit rack panel.
They build quality is great & they do what they are supposed to do.
The only downside is that there are no screws included with the plug.
Overall I am really happy with it!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Neutrik NA3 FDM

682 Customer ratings

You have to be logged in to rate products.

198 Reviews

Served with love!

Neutrik NA3 FDM

682 Customer ratings

You have to be logged in to rate products.

198 Reviews