Sennheiser E 602 II

I was looking for a relatively inexpensive solution to record demos in our rehearsal place. I was (still am) really specific about the kick drum sound I want to achieve: Modern punchy rock sound, with enough low end, without getting too much click sound at highs like a metal record would have. After 3 years of using this mic I can say I have found the best solution for my taste without busting the bank.

When it comes to drums I record it with 4 or 5 mics, using close mics only on the kick and snare. I get the best result on the kick with the E 602 II just slightly inside the port hole facing the beater. I get that "in the face kick" sound I need. It certainly has a character that is not for everyone, but for me It is perfect without the need of a subkick.

On the plus side, when we record the drums separately, I can use this one on the bass cabinet too. It gives a nice clean and powerful sound, but I would never use this mic alone when I want raw punk style bass sound.

Now the downsides:
I have some problems with the screw that holds the mount part. It is too loose or too tight. So when i set the position of the mic with the stand, a screwdriver comes handy to fix it in the right place and make sure it stays there during the session.

There is another thing I have found problematic in build quality after a while. The XLR connection lets the cable come out just enough cut the sound, but it is visually unnoticeable. It took me a little time to realize that it's not my sound card or the cable that causing the cutouts. Knowing that I just double check the connection before pressing the record button, and mostly everything is fine.

This two problems I have would not stop me buying this mic again, and the second one would come with us on tour. It looks and feels like it can handle abuse really well, but first of all: This mic gives me closest sound to what I want on the kick drum than the other industry standard kick drum microphones that are mostly used around here in venues or mid priced studios where my hobby band could go.

Needed a good bass drum mic so I purchased this one with some guidance. Ok, the mic itself is great. The build is solid and it really is a good quality piece of equipment. Now, on the other hand, I did have some issues getting the right positioning and sound coming through the PA system from the bass drum. This may have been a personal lack of knowledge but as several people tried several tricks and whatnot, they had issues as well.

Personally, this could come down to the size of your bass drum (height and depth). I believe a deeper sound from a larger bass would work better with this mic than a higher pitched smaller bass.