Stairville Adapt IEC - EU Coup 0,25m

I bought this together with the longer version, to allow plugging gear with a fixed cord into my Power Conditioner.
The quality is great and it does it's job, but I did not account for the weight when I ordered it. It's quite heavy, meaning if it's not supported by something, it will put a lot of strain on the Power Conditioner when plugged in, which in my case (and probably most others) is always.

El cable es robusto y fuerte, con tapas para las conexiones que no vas a usar. Para lo que sirve, funciona perfecto!

These have been perfect for my setup, specifically for the DMX fixtures which need to feed power to wireless receivers (which have power in-power out plugs). These are heavy-duty extensions made for commercial stage use and no doubt will last for a small lifetime - greatly recommend. [Related Quick tip: power the fixture (if hot-wired) always without the extension plugged in - otherwise you MAY blow the fuse on the fixture due to sudden power draw.]

What I like about this cable is the length. 25cm is just perfect for my back of the rack. I put these to my Furman PL8-E and works flawlessly.

One strange thing will be only the quite funky plastic and rubbery smell when it unboxed. But it's understood since this items is in high demand, and they rapidly produce them I guess. So I consider the smell as a freshly cooked smell :)

At this price point will be a shame if I'm not recommend this one. Fantastic!

Got these to connect my gear with a Furman power conditioner. Had no problem what so ever to connect all 7 i got!

"Very basic" is not a criticism. Should be an uncomplicated piece of hardware and they work adequately.

Caveat emptor because these do not work well with some AC adapters, such as you might use with your audio interface or computer A/C adapters. I ended up having to trim off (!) the top 4-5mm of the Stairville units to get those adapters to sit securely into the receptacle. Not all that big of a deal, but not a fantastic design.

Build quality is good and it gets the job done.
But it is very bulky and heavy (hard to hide). I also had the issue that the big rubber protector around the port is way too deep so my cables did not go deep enough. This was easily fixed with a knife because the rubber is very easy to cut off.

I use them with a furman power conditioner for some extra sockets

The quality of the plastic and construction are not that good. Some power plugs wouldn't fit so I had to cut with a knife a slice of the side of this adapter for the plugs to fit.

I use this when I power chain my lightning fixtures on the truss. Most of my spot lights have power in/out so I use this at the end of the chain if I want to power something small up there, instead of another long power cable.