t.akustik Rehearsal Room Set S Premium

Bundle offer comprising

2x t.akustik Highline A1 Silver Spruce

Absorber Set

• Optimises room acoustics
• Main frequency range: approx. 400 to 3150 Hz
• Material: Polyester acoustic foam
• Flame retardant in accordance with FMVSS 302, Burning rate: < 100 mm/min
• Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm
• Colour: Anthracite/Silver Spruce
• Set content: 4 Absorber panels

2x t.akustik Diffusor Manhattan GR eps set

Diffuser Acoustic Elements

• Made of hardened EPS foam
• For optimising room reflections and room sound
• Suitable for recording studios, radio stations, home recording, and hi-fi rooms
• Effective range: Approx. 900 - 3,250 Hz
• Easy assembly and disassembly
• Dimensions: 600 x 600 x 150 mm
• Box contains 2 units as a kit including assembly instructions
• One kit consists of 13 single elements
• Colour: Graphite

Note: Acoustic adhesive is recommended for preparation and attaching -- Article Nr. 481723 (not included)

6x t.akustik Highline CBT1 Silver Spruce

Corner Bass Traps

• Absorber for optimizing room acoustics
• Especially suitable for the absorption of low-frequency sound waves
• Material: Polyester acoustic foam
• Main frequency / effective range 80 to 1000 Hz
• Flame-retardant according to FMVSS 302 Burn rate <100 mm / min
• Dimensions: 370 x 370 x 600 mm
• Colour: Anthracite / silver spruce
• Shipping quantity: 2 Pieces

Thomann Hand-Kartuschenpistole

Hand sealant gun

• For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
• Hexagonal plunger rod
• Red lacquer finish

7x t.akustik Contact Glue

Acoustic Adhesive

• For acoustic convoluted, pyramids and basotect
• Solvent-free
• Elastoplastic
• Single-component special polymer adhesive
• Fast-curing and more universal than structural and assembly adhesives
• Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
• Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
• 310 ml/ 490 g Cartridge
• For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
• Note: Working temperature + 5° C to + 50° C
• Storage: Cool and dry at + 5° C to + 25° C
• Skin building time: 10 - 15 min
• Colour: White
• Consistency: Pasty
• Base: Polymer dispersion
• Spec. mass: Approx. 1.58 g/cm
• Protect from frost and heat
• Suitable hand-held cartridge gun: Article Nr. 417630 (not included)
• New follow-up product: Article Nr. 481723 (not included)