tc electronic Honey Pot Fuzz

I bought this pedal as I wanted to expand my sound. I never really played with fuzz, so I thought I would give it a try.
Pedal is built well. Pots seem to bo ok, the switch, well maybe not so much, but it works well so far, so ...
It's built to a standard. Altrough it's behringer made, I believe, the construction cannot be compared to behringer pedals in any way. No plastics, just good old sturdy metal. The input and output jacks seem to be nice as well. Not top end, but good enough.
It is a bit noisy, but I guess all fuzzes are. It's not too bad, I used it in studio, feeding my overdriven marshall and it sounded really good for solos. For chords, for my taste, it tendst to be a bit bass heavy. But for solos ... man, it's almost like you are playing a violin! Endless sustain, really.
It works nice into clean amp, into over driven amp and to responds well if you boost it with overdrive pedal and vice versa, meaning it boosts overdrive or distortion pedal in front of it.
For the money, really cant go wrong with it.

Samples of the tone are abundant so I'll pass; what you won't hear in sound samples is how the pedal is EXTREMELY silent, even at the hardest setting. Compared to the distortion's base hum of my four guitar amps and the Metal Zone pedal, this effect is more silent than all.

I have a great Strat clone with classic Fender 57/62 pickups, the most shimmering of all, but not stacked, so they hum badly with moderate distortion, and almost unbearably with highest gain. So I had left it to nearly clean tones only but the Honey Pot allows for harshest sound without the irritating buzz, and now the guitar is used more.

If you are stuck with low gain because of noisy single coil pickups this is your savior. You can play hard rock and metal and forget the hum of old days. At the minimal setting the fuzz acts like a gentle crunch, gives more presence and bite to the bare clean tone.

The jacks lock very positively with good clicks, and the pedal drives so little current I left the rechargeable battery several weeks. Only the super short screws are a bit annoying but I made knurled replacement screws so no need for a screwdriver anymore. If you do that, beware that the screws must be only 4mm or 5mm deep or they will hit components inside.

The build is very strong, the foot switch is tough and positive, the knobs are not scratchy, no,issues. I can't insist too much on the silence of that pedal, it is such a relief to play the hardest tones and hear no buzz at all. Highest recommendation.