To the page content

22.11 - 02.12

cyberweek-deal

Teenage Engineering CA-X

113 Customer ratings

4.3 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

74 Reviews

Teenage Engineering CA-X
93 AED 24,37 €
Plus 269 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1
P
Perfect
Panos_OK 26.02.2021
It seems that this case completes the POs and makes them look much more proper and safe. As if the initial POs are somehow half and this really makes them complete.
I have seen far too many cases for these little machines but the TE CA-X ones are definitely the best looking ones.
Only for proper Operators!
quality
0
0
Report

Report

DB
An ambiguous protection
Dr. Builder 05.07.2024
Installing this protection on your pocket operator (PO) is an ambiguous experience. Not in the last because you need to remove the hinge from the PCB, which can mess up your board when not done appropriately. next to that, although meant to be removed by teenage engineering, the PO with the hinge has an own style... The protection could be cut on the top part to slide the hinge through, I did not do that, and I would guess it is not so easy to cut the good quality rubber.
The biggest plus I would call the somewhat more protection on the battery compartment (battery poles are covered).
The biggest minus is that the PCB screening is covered, which is normally different for each PO, and thus the functions must be remembered. Next to that the cover does offer slight, but not much protection for the PO display.
quality
0
0
Report

Report

M
You do need it
Motherspot 19.12.2020
To protect you'r PO. good quality cover. Coun't it in when you buy a PO.
quality
0
1
Report

Report

S
Best case for this little toy
Sunshinemkii 01.03.2022
This is handiest case for the po series and keep their mobility as much as possible ... i'm here fot buying second one
quality
0
0
Report

Report

J
Good, but overpriced in my opinion
Jonas78 22.07.2018
I've bought this casing for a PO Tonic as I think the bare PO's feel too fragile for frequent usage. As there is no specific casing for the Tonic (or other newer model operators) you're automatically stuck with this general model, which doesn't have the exemplifying symbols on the buttons like the model specific 'pro-cases'.

Although the build quality is decent I think for almost 40 euro's it's too expensive of a peripheral, but as this is teenage engineering it is to be expected.

My biggest gripe at the moment is that older, cheaper (29,- euro), specific casings like the CA-12 are discontinued, so if you have a PO-12 and want pro-case protection you're stuck with this one.
0
0
Report

Report

A
Quality cover
AiKelt 26.05.2020
The cover feels great and looks great too, you can tell that it's worth the price... although it doesn't fit perfectly for my PO-33 K.O.

I had to fiddle with it quite a bit before my device fit comfortably (maybe I am doing something wrong). But other than that I have no complaints about the quality, so I do recommend it.
quality
1
0
Report

Report

M
Great Feel, Fantastic Design, Happy Purchase
McSharry 19.12.2019
I'm beginning to think Teenage Engineering can do no wrong. This is a brilliantly designed little case and the quality is exquisite. It keeps the pocket operator synths not too bulky but adequately protected from damage.
No complaints, and I'd definitely recommend if you're getting a pocket operator.
quality
0
0
Report

Report

j
Essential purchase for PO-32 owners
julianzi 19.07.2017
I purchased this for my PO-32 to provide protection during gigs, and was really impressed with the quality, it fits perfectly and encloses the PO32 so that it stretches over the unit like a glove and will not come off in everyday use.

It also comes with a lanyard, to encourage you to wear it around your neck, It makes a really neat fashion accessory, for making beats on the go.
The lanyard is well made, so there is no risk of the hoop fraying.

The case does not interfere with the built in microphone or speaker so you can sync beats with the upload software and playback without issues.

Also the case has tiny cutouts so you can clearly see the LED status.

The case makes a real difference to learning the unit's operation, with the pictures on the keys helping to assist in remembering all the key combinations,

I would definitely recommend the case for the pocket operator. The PO32 is quite an expensive unit and without the case it is pretty fragile,
In my opinion it really should ship with this case by default, but I can see why it doesn't to keep costs down.

Strongly recommend :)
0
0
Report

Report

J
Cool..but,...
JoniJude 28.02.2024
Purchased this so that I could be a little more confident carrying my PO around. But, this cover does not do much if anything to actually protect the device. The back half is not covered at all by this...so it seems like its just for aesthetics. Looks cool and feels nice in my hand, but you'll still need a carrying case...so it's still not really safe to put in your POCKET. I expected more practicality from Teenage Engineering
quality
0
0
Report

Report

S
Does what you'd expect
Saturo 03.10.2024
It can take a bit of work to get the Pocket Operator into it, but it fits well and provides a feel of durability.
quality
0
0
Report

Report

Teenage Engineering CA-X