Customer reviews about the t.bone Microphone Holder S

m

Great for the price

maajstor 26.04.2018

I bought several of these as a replacement to original Rode NT5 mic holders.
They seem a little fragile, and threads are all carved in plastic, but two years and some, so far they serve their purpose very well. Nothing came loose, nothing broke. I do handle it carefully as I do with all of my equipment.
Plasatic material it's made of is flexible but firm enough to hold even a little heavier Sennheiser ME66 with K6.
In the end, if it does break, it's not expensive to buy another one. My best recommendation.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

N

Tight squeeze, but useable

Nyli 18.02.2014

I bought these for a pair of Akg pencil mics. They fit well, but they are a tight squeeze. I guess that's what you want, but i feel a bit funny pushing mics into a tight clip......
As with any mic clip the manufacturers measuremnts are approx, and all pencil mics may have slight differences as well. Unless you can go to a shop and physically try things out, it will be a punt. Also what's tight to me may not be tight to you. As i have said in earlier reviews i look after my equipment, and can be a bit anal about slight marks, and scratched etc.....For the price point they're good value, just do your research and measurements, then cross those fingers....

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

T

Perfect

TomislavK 10.02.2021

just pick the right size for your microphones and smile - it works - looks like not branded production of a more famous company.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Good quality product

Sonoquilibrium 28.01.2021

I use it in the studio for my pencil condenser mics and I have to say that the quality is really great!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Good replacement for Beyer mic's

Squareheead 13.05.2019

I use these for Beyer 201, 160 etc, I went one size smaller for 84 or 451.

Good tight clip, doesnt droop.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

F

Sturdy

Fran123 07.07.2020

Great sturdy small microphone holder for my small condenser microphones.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

G3

Reliable and at no great cost.

Graeme 312 08.05.2014

The amount of microphone clips I used to go through before this style of rubber/ plastic type came on the go seemed every months a new one was required. This clip must be the answer to all you out there, who has taken your stand out of the boot and your clip is smashed. To be made by K&M is even better as they are one of the top makers today. I changed the plastic stand adaptor to a brass one just for extra protection. would highly recommend

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

It does what is made to do

Ares-Kalogeropoulos 09.07.2019

The build quality is really good for the price. Feels like rubber, its elastic but not lose. Its steady and nothing will slip of through it.
Ideal for shotgun type mics but also very nice for my AKG C3000B.
A really trustworthy buy.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

M

Microphone holder

Mikko7391 24.02.2014

There is not much to say about this simple piece of equipment but it does what it is supposed to do. It holds a small condenser microphone well. Even though it obviously does not come with a shock mount. It suites well for situations where you don´t want to highlight the presence of a microphone if you are not worried about mechanical distress to the microphone.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Good and cheap, does the job well

Anonymous 17.09.2015

Great for small condensers like C451, Line Audio CM2/3 etc. Also works well with Sennheiser e906 when that small holder eventually is lost. Would not use for e.g. SM57, better to go with medium size for that size of mic. Can be adjusted to be tighter easily.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

the t.bone Microphone Holder S

556 Customer ratings

You have to be logged in to rate products.

184 Reviews

Served with love!

the t.bone Microphone Holder S

556 Customer ratings

You have to be logged in to rate products.

184 Reviews