Thon Case Behringer X32

Don't think if you put your X32 mixer in this case that it's fully protected. This case will protect it only to certain degree, and that is from dust and light transport handling.
I don't feel comfortable carrying a mixer vertically with it, because the foam fillers are not 100% fit to mixer's size, so there's some space for the mixer to wobble inside.
Locking mechanism keeps it safely closed. Metal framing seems good and sturdy in opposite to plywood on the sides.
Overall I think I should have invested a little more in a little better case than this, however this Thon case will do for it's purpose. It's not good, just meh and okay.

Good
i) Low cost compared to other flight cases that I researched in the UK if bought with the X32 mixer as a package.
ii) The dimensions especially where the back of the mixer sits. Although it doesn't have a dog box there is plenty of room to keep the cables tidy.
iii) The foam which the mixer sits on allows the passage of air under the mixer and doesn't obstruct the fan keeping the mixer cool.

Bad
i) Made from veneered plywood which lends itself to being easily scratched. Obviously this keeps the cost down as supposed to using hexi-board.
ii) Not enough foam inside to prevent the mixer from moving about inside. You can hear it "flopping about" when lifting it onto its side.

Other Notes.
i) Over small distances I'm able to lift and carry the case with the mixer installed. Over longer distances 2 people are better for carrying or a "dolly truck is required"