To the page content

Adam Hall PCL 10 Pro Power Conditioner

105

Power Conditioner

  • With rack lighting and volt / ampere display
  • Mains current filter and power distributor with 10A including pull-out rack lighting
  • Total load up to 2000 watts
  • AC Noise filter to reduce interference from radio frequencies and electromagnetic interference < 20 dB, 1.5 MHz - 200 MHz
  • Overcurrent protection
  • Circuit breaker
  • Suitable for all applications in recording and on stage
  • 8 Switchable connections on the rear + 1 unswitched on the front
  • Mains switch at the front
  • Dimensions (W x H x D): 482 x 190 x 44 mm
  • Construction: 19" / 1 U
  • Includes 4 cold device cables
Available since April 2015
Item number 360186
Sales Unit 1 piece(s)
Number of Outputs 9
Connector For Lamps Yes
Voltage Display LED
Design 19" / 1U
Total load 10 A
855 AED 223,53 €
Plus 266 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

105 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

features

quality

47 Reviews

S
Introduced more noise, not less
Stian_H 10.03.2022
I have had very little luck with this, overall I would say it seems more suitable for maybe a PA system, than for home studio use.

When I had my computer equipment powered through this, instead of reducing emissions, it acted as a rebroadcaster, meaning I had the interference from the computer hitting me from both sides, instead of reducing it.

This seems to be a common issue with power conditioners, not specific to this particular model. The conditioner tries to remove noise from the mains, but if you plug in gear that itself produces noise, it will instead create a common grounds issue, instead of removing anything.

Aside from that, however, the unit itself produces noise hitting everything around it, simply by being powered on with nothing plugged in it produces noise.
Even with balanced cables, it adds a high pitched whine and hiss to the signal, meaning you have to keep all audio gear away from it.

The only way I can see this being useful, is if you keep it completely separate, plugged into a separate power circuit, and physically far away from instruments or audio cables, which defeats the purpose for my intended use.
features
quality
8
0
Report

Report

S
Too noisy to be good
Stevensson 10.12.2021
A while back I built my first rack and off course I was pretty sure I needed a power conditioner (many youtube clips will tell you why). The Adam Hall seemed about right in the quality for money range. At first I did have a few issues with what seemd like a faulty connection (you would here the electricity sparkle) but I could solve that. Today - upon - building an on desk rack, I suddenly realised this conditioner makes a whole lot of noise (even when just plugged in and doing nothing), so I decided to use a basic unconditioned socket (also from Adam Hall). At least it got rid of the noise and to be honest, everything worls like a charm, so I'm still guessing why I thought I needed a conditioner in the fierst place. Looks good, seems of decent build quality. Only buy if you enjoy a 60 cycle hum.
features
quality
7
0
Report

Report

JL
Broke within a few months
James Lupson 26.11.2020
on arrival it felt cheap, then one outlet died in a few weeks, and now its dead completely.
features
quality
4
0
Report

Report

B
Does exactly what it says on the tin
Binraider 22.04.2018
I had a ground loop and high frequency noise issues associated with the power supply in my home studio. Between this and a ground loop isolator it's fixed the problem. The rack mount is well thought out and would be good on the road. Only one minor problem. The IEC sockets dont have the greatest grip in the world, something to better secure cables in place might be helpful. A symptom of the standard socket design, not the device...
features
quality
1
0
Report

Report