Catalinbread Talisman

First of all, the reverb sound reminds me UAD EMT 140 and the audio quality is competitive with Strymon pedals. Usually plate reverbs are for vocals but this pedal works great both for clean and overdriven guitar sounds adding short invisible room like tones or bathroom like wall of sound in extremes. ?Time? knob controls the length of reverb tail. ?Pre-delay? allows you to use this reverb as slapback echo when reverb time set to short. ?Mix? knob sets the level of reverb sound without affecting dry signal level, which I like a lot. ?High pass? allows you to balance reverb sound between invisible or bathroom like. I usually set it at 3 o?clock for ?invisible? side.

This pedal has coloring preamp circuit, which affects both wet and dry signal. You can use this pedal as very cool boost pedal (without any reverb) if you set ?Vol? to maximum and ?Mix? to zero! Also the preamp sound depends on input voltage! Try 9, 12, 15 and 18 volts. My favorite is 12 volts, it gives the most neutral coloration.

The pedal has internal switch to change bypass in ?soft? mode (default) or in ?true bypass? mode. Unfortunately in ?soft? mode reverb signal is leaked into the output even if mix control set to zero and also I had nasty feedbacks in extreme positions so I switched it to ?true bypass?. Besides this the pedal operates flawlessly already for several months and earned its place on my Pedaltrain Nano pedalboard. It can be used as reverb, slapback delay and booster preamp pedal.

The reverb implementation is digital of course but probably due to preamp circuit the pedal sounds very smooth and analog.

I mainly use it to get the Tony Iommi sound in his first Black Sabbath albums. It adds to my P90 pickups the exact amount of bright and texture for that big and gorgeous tone.
It works from 9 to 18 volts and includes a internal switch to be true bypass or buffered. The pedal includes a boost circuit, so it can be used like a little booster and buffer pedal.
Other nice features are a high pass filter (high pass pot), pre-delay and mixer for dry and reverb signals.
The buffered mode allows an unchanged infinite reverb (quite ambient/dream) setting the time pot to max when switching off with the foot switcher.
Ah, obviously, it's a digital delay.

This pedal has a very vintage and warm reverb, a wonderful and very pleasant (nothing harsh) and-chain effect that will help any player to better accommodate the feel to que song! Great plate reverb emulator! Nice manual - very practical and explicative. The controls are very intuitive and easy to operate. Size is pedalboard friendly, light, but very well constructed. Nevertheless, considering other Catalinbread pedals, this one could have a better painting. Overall? Great pedal!!