Tascam SB-16D

Dante Stagebox

• Dante-capable stagebox and audio interface with 16 analogue inputs and outputs
• Up to 96 kHz sampling rate with 32-bit resolution
• Redundant Dante operation with primary/secondary lines
• With etherCON-compatible connections
• Support for Dante Domain Manager
• AES67 compatible
• Support of Dante Domain ManagerData transmission compliant with SMPTE 2110
• GPIO interface with eight inputs and outputs
• Expandable to 16 inputs and outputs when using a Sonicview mixer
• Adjustable brightness of the status LEDs
• Selectable reference level
• Supported operating modes: Redundancy and switchover mode
• Fully controllable via Sonicview mixing console
• DC input for redundant power supply (power supply unit not included)
• Remote control and offline editing possible with Tascam IO Control software
• Format: 3 U
• Dimensions with feet (W × H × D): 454 × 140 × 180mm
• Weight: 4.5 kg
• Includes power cable, set of rack brackets, set of screws for rack installation, Tascam ID registration guide and operating instructions

Analogue inputs/outputs:

• 16x 3-pin XLR mic/line input (balanced) with switchable phantom power (48 V) and status LED for input signal and overload
• 16x 3-pin XLR line output (balanced) with status LED for output signal

Digital inputs/outputs:

• 1x Dante Primary
• 1x Dante Secondary (compatible with etherCON CAT5e), number of audio channels: 64 (48kHz) / 32 (96kHz)
• 1x GPIO (Sub-D25)
• Equivalent input noise microphone preamplifier: < -128 dB(A)
• Frequency range (mic/line or Dante input to line output): 20 - 20,000 Hz, +0 dB / -0.5 dB (48kHz); 20 - 40,000 Hz, +0 dB / -1.0 dB (96kHz)