To the page content

Radial Engineering Tonebone Bigshot ABY/Y MKII

65

ABY Amplifier Selector

  • Passive operation - no power supply required
  • True Bypass
  • Ground lift switch for output B
  • Phase reversing switches to match the phase orientation of the amplifiers
  • Switch for internal transformer isolation to eliminate hum
  • Toggle A / B foot switch
  • Both foot switch
  • 6.3 mm mono jack input
  • 6.3 mm mono jack tuner output
  • 2 x 6.3 mm mono jack outputs
  • Power supply via 9 V DC power supply with min. 120 mA, centre negative (not included)
  • Status LEDs
  • Metal housing
  • Power supply only required for status LEDs
  • Dimensions (L x W x H): 96 x 92 x 52 mm
  • Weight: 560 g
  • Made in Canada
Available since March 2017
Item number 409364
Sales Unit 1 piece(s)
Type A/B/Y
LED Display Yes
PSU Connector Yes
Shape Floor Effects Pedal
MIDI Interface No
Number Of Channels 1
Inputs 1
Outputs Per Channel 1
Grd Lift Switch 1
Design Footswitch
Show more
B-Stock from 475 AED available
505 AED 133,61 €
Plus 266 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

65 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

features

quality

38 Reviews

S
Nice ABY
Seungku 16.04.2018
I needed to run two amps at the same time, while I was recording. So, I was in hunt of nice ABY switch and this came up.

Pro: It has every features proper ABY switch should have. Built like tank, has enough LEDs so you know where your signal goes. On output [B], ground lift and isolation transformer to eliminate ground hums and buzz, can reverse polarity to prevent phase problem between two amps. Very effective and thoughtful.

Con: There's noticeable tone shifting when you engage 'Isolation transformer' on. So you had to tweak amp's knobs on output B again to get the sound you like.

If you are looking for proper ABY switch, look no further. Get this. I am giving just 4 stars because after recording, I hardly use it in actual gig or practice situations.
features
quality
1
0
Report

Report

K
Great piece of gear!!
Katito 04.07.2017
Used to have problems with ground loops while playing in stereo, the noise was just unbearable. Since I purchased this well constructed metal chassis pedal everything works as it should, not to mention that both amps work in fase now. It's smaller than it seemed in the photos which is nice to save space in the pedal board. No power needed unless you want to know where you're at, and in that case the LEDs let you know if you're playing A, B or both amps. Probably the most robust pedal I have, I'm very happy with it! Highly recommended if you play in stereo!
features
quality
1
0
Report

Report

KA
KIKI ARIKI 06.07.2020
So far this meets my expectations well. Have used it to send one signal to an amp with solid state preamp/ tube power amp, and the other signal going to DAW via a USBinterface. Very quiet. Also worth mentioning I used an isolated power supply. When tried with 2 Amps, the previously mentioned one and a Blackstar id core 40 v2, ground lift helped to remove some noise. However there was some higher pitched noise from the Blackstar. I suspect it is something to do with the digital amp circuitry. I am yet to try the device with two completely non digital amps. With both setup scenarios I did not notice any tone loss.
features
quality
0
0
Report

Report

F
Solid and works!
Frednugent 29.05.2019
I love Raidial gear. Just found out about them and this is my 2nd piece in the last few months. Like the JDI this piece just does what it should in a really solid and clear way. Split your signal to A or B or have both playing. I just tried with vocals through 2 little amps for a live show and it worked perfectly. Its passive so you dont need power (unless you want the LED). It's a bit on the heavy side but still small. I can tell it's going to last for years. Solid, easy, small = Great.
features
quality
0
0
Report

Report