To the page content

Swissonic SA 33

27

Mixer Amplifier

  • 30 W
  • 100 V and output for low-resistance speakers (min. 4 ohms)
  • 2x Micro- and 1x Line/phono input
  • Master tone controls
  • Talkover function
  • Pre out / Amp in for looping
  • 12 V Emergency power supply is possible
  • Dimensions: 280 x 75 x 190 mm
  • Weight: 4.5 kg
Available since August 2012
Item number 277393
Sales Unit 1 piece(s)
Power @ 100 V 30 W
Zones adjustable No
Matrix No
Mic In 2
Stereo In 1
CD-Player No
Tuner No
USB-Player No
Bluetooth-Player No
LAN Connection No
Width 280 mm
Depth 190 mm
Height 75 mm
Weight 4,5 kg
19" No
Power @ 4 Ohms 30 W
Selectable Zones 0
Line Out No
Remote No
Prio-Sw 1
19" Kit No
Works with 110V 1
External Volume Poti No
Show more
B-Stock from 266 AED available
354 AED 91,60 €
Plus 269 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

27 Customer ratings

4.4 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound

quality

16 Reviews

A
Good value for money
Anonymous 30.06.2014
Bought this amp for use in a small church. Works very well. used with a lapel mic for the priest. Easy to get the right levels for optimum performance. would recommend for anyone who's on a budget.
1
0
Report

Report

A
Works ok with 230 VAC, but not with 12 VDC input!
Anonymous 22.10.2014
Basically this amplifer does its job as supposed, but only when powering on 230 VAC. When running on 12 VDC (also tried with 14,4 VDC - lab psu) strange thing happen: if using mic on MIC1 (talkover function), when signal goes higher then certain level (around 2/3), amplifer shuts down and recovers after around 5 seconds. If you connect microphone to MIC2 (no talkover) it works normal!!! (that means, that power amplifer probably works fine, but not the logic for talkover, which somehow puts amplifer in some standby mode).

Talkover function is fixed on first microphone channel and works ok, but no parameters can be set (music/talk ratio, release speed ...).

However, for such money that's quite good amp to use with 230 VAC.

[EDIT]
Because using at 12 V is urgent for my application, I first tried to raise voltage on 12 V input up to 15 V, but didn't help. Then I used 5A adjustable DCDC stepup, set it to 21 VDC and connect it right after the bridge rectifier after transformer (on 230 VAC line). Additional 10000 uF capacitor was added as well. This way, amplifer can also work with 10 V input voltage.
1
1
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
RK
Einfach und gut einsetzbar
Rentner Karl 14.12.2012
Ich suchte ein Gerät für ELA-Beschallung kleiner Säle (Diskussionen, Vorträge) und gelegentlichem Freiluft-Einsatz (Ansprachen).

Beide Kriterien erfüllt das Gerät anstandslos. Der Klang ist völlig ok, die Lautstärke ebenso. Mikros gehen über 6,3er Klinke, AUX leider nur über Cinch.

Es gibt keine Pegelanzeige, aber offensichtlich hat der Vorverstärker genügend Spielraum. Hörbare Verzerrungen hab ich nicht zu Stande gebracht; trotzdem würde mich zumindest eine Clipping-Anzeige doch etwas beruhigen.

Da ist es gut, dass man z.B. einen Kompressor (Sharc) einschleifen kann, wenn auch nur über Cinch. Der präsentiert mir die Pegelanzeige.
5
1
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
R
Bourin
Roland372 22.08.2013
Un ampli d'installation MONO de base.
J'ai cru que c'était de la hifi, mais non. Très lourd et peu pratique. Format bizarre sans adaptation aux racks
6
5
Report

Report