TonePros LPCM02 C Tuneomatic Set Chrome

I bought these parts for an Epiphone Les Paul Standard as part of an upgrade I gave the guitar. They fit perfectly onto the Epiphone body and it's existing parts. (I didn't bother pulling up the lugs from the Epiphone body, I just screwed the Tonepros studs into them and they fit perfectly).
The bridge and tailpiece are of the locking variety, which is great as they do not fall off or move when you take off or change strings and are less susceptible to wobbling or slipping along the studs ruining your action and intonation over time. The bridge's range of saddle adjustment is greater than the Epiphone type, meaning the saddles can be adjusted forward or backwards to a greater extent, giving more precise intonation. As for the guitars sound, I think they have improved the sustain noticeably and made it sound a bit brighter on the cleans.
These parts are expensive, but of very good quality and build and well worth the price. I feel they give a noticeable sound improvement, but their real value is that they are a real improvement to the instruments tuning and intonation stability and save you a lot of headaches in checking, adjusting and tweaking. If anybody was thinking of replacing a damaged bridge or upgrading an old guitar or a backup guitar, I would recommend they give these parts consideration to squeeze the most out of their guitar.

To keep it short:
bought it as replacement bridge for HarleyBenton SC-550. It fits perfectly. I replaced the bridge and tailpiece completely, including posts.

You really hear and feel the difference (you do not see as much, as both bridges are almost identical).
Improved sustain. That could be related to the small locking screws - better contact with posts? Or is just that small difference in materials and design used. It's ingenious.
Thanks to the locking screws it stays always in place (that is for both the bridge and tailpiece).

Simply amazing bridge.

This kit fitted straight onto my Epiphone SG - it comes with no instructions so make sure screws for the saddle face the neck. It is a very well-made kit. It takes a few weeks to play in but then has a huge effect. Guitar stays in tune, and bridge doesn't move when you re-string but the main advantage is you can now set the intonation correctly and it stays adjusted - this gives a very much better tone and crunch when playing. Highly recommended as an upgrade.

Also passt. Die Madenschrauben sind auch sehr nützlich, finde ich. Kurz und knapp.

Was ich damit im Detail sagen möchte: Diese TuneOMatic wertet meine Gitarre ordentlich auf, in der Verarbeitung gibt es nichts zu bemängeln und hat man seine favorisierte Position fein abgestimmt nur noch die Madenschrauben fein anziehen und alles sitzt bombenfest. Super, wenn man Saiten wechselt (fällt mal nicht alles auseinander, weil man wieder vergessen hat, dass alles nur aufliegt) und verbessert durch diesen zusätzlichen Grip auch das Sustain. Der Saitenhalter verdient ein Lob: Die Art und Weise seiner Beschaffenheit, ich sage mal, er ist "massiver" als der Werkseigene von Epiphone, tut Ihr Gutes. Was ich aber noch erwähnen möchte: Die Schrauben für die Bridge Links und Rechts: Die mitgelieferten lassen sich nicht bis zum Anschlag in den Korpus einer Epiphone Les Paul drehen, Resultat ist eine unfreiwillige Erhöhung der Saiten, was die Bespielbarkeit der Gitarre leiden lässt, wenn man flache Saitenlage bevorzugt, so wie ich. Glücklicherweise kann man die Werkseigenen Schrauben von Epiphone auch für die neue Bridge verwenden und anziehen lassen sich die Madenschrauben auch an diesen wie an den mitgelieferten. So kann ich sämtliche Vorzüge dieser TuneOMatic geniessen und doch bei meiner favorisierten Saitenlage bleiben.